Site-2-Site VPN configuration between 2 virtual WAN HUB from different subscription
Hi, I am trying to setup the Site-2-Site VPN between 2 hubs belongs to different subscription. While I was setting up the Site-2-Site VPN my VPN gateway failed and now all other VPN connection are showing in failed condition. I reset the Virtual VPN…
Integrate Cisco SDWAN OnRamp for MultiCloud with a Cisco FTDv pair at the edge of the Azure environment
I am trying to add Azure to my Cisco SDWAN environment using Cisco's OnRamp for MultiCloud. I also need packets inspection (both directions) by Cisco FTDvs (pair) configured between Azure load balancers (LB). So ingress traffic should flow as such: vWAN…
Azure vWan Hub routing between regions
Hello, We are having issues with Azure Routing, and we cannot get around this. We have a DC in an identity network on our vWAN Hub on our North Europe Hub. This is unable to communicate with our UK South DC on the same vWAN. All other vms are in…
Cant delete virtual hub - porvisioning state "Failed"
The hub depoyment resulted in a failed state. Tried to reset the router, reset the hub and updat the router to the lates version from the portal with no result. All attempts failed with error. I also tried to delete it through resource explorer with…
Auto Disconnect P2S VPN Connections
Hello, I am trying to setup the ability to disconnect users on an Azure VWan, Hub, P2S session. This can be manually done by going to the Point to Site Sessions page and manually disconnecting it. However, this is not ideal for trying to disconnect users…
Internet Access Issue on macOS with Azure Virtual WAN Point-to-Site VPN whilst working for Windows
We are experiencing an issue with internet connectivity when using the Azure VPN client on macOS to connect to a Virtual WAN Point-to-Site (P2S) VPN gateway. Issue Details: Environment: Virtual WAN with Point-to-Site VPN gateway configured for forced…
UDR when Next Hop is unreachable
Hello, I have UDR defined with NVA as the next hop type. I noticed when NVA is unreachable, the route table doesn't invalidate the UDR. Is there a way to remove the route when the defined next-hop UDR is unreachable? Thanks, Lei Tian
AZFW DNS proxy across virtual wan
I have configured the azfw policy for dns proxy to a server that is on-prem accessible through another virtual hub. My problem is bgp is not advertising the firewall's private address across the vwan to the other hub. The firewall policy in question…
Azure vWAN - lost connection during creation peering with custom RT
HI Azure Community We have Virtual WAN with two HUBS , one in US and one EU. In US HUB we have seven Vnets peered to the HUB/Firewall and all traffic is going via AzureFW. Everything is working with default RT. (there is only route 0.0.0.0/0 to Azure…
Azure VWAN traffic between source and destination worked in HUB but did not work when the hub became secure with Azure Firewall.
Hi Experts, Please see the attached ENV diagram; when the VWAN does not have a firewall, traffic from siteA to App01 works, and vice versa; however, once the firewall is installed in the HUB with the allow all FW policy, communication from siteA to App01…
"Azure Virtual Wans - vwans | Connection Status of the HUb: NOT CONNECTED"
Hello, Hello, I tried to configure and set up a connection between two vwans. Below are the design details. Two Vnets in two different regions (Vnet-A and Vnet-B). VNEt-A: 10.40.0.0/24 | Vnet-B: 10.60.0.0.0/24 2. Two Virtual hubs (vHu-A:…
Create Site to Site VPN from Virtual WAN VPN Gateway to my Customer's Virtual WAN VPN Gateway
My corporate network uses Virtual WAN and Hub with multiple VNets connected to my hub. I have a customer that also has a similar configuration of a Virtual WAN and Hub with multiple VNets connected to their hub. My Customer and I want to create a…
Can Azure Traffic Manager work with vWans and vHubs?
Can Azure Traffic Manager work with vWans and vHubs? Can traffic manger be used for a regional failover to a secondary site for our VPN site to site as well as our point to site users?
I am having trouble connecting from an Azure Point-to-Site VPN to an Azure Web App via private endpoint.
The VPN is in an Azure Virtual WAN Hub, and I have an on-premises Site-to-Site connection and peered virtual networks in Azure virtual wan hub. Web Apps are configured with a private endpoint in one of the peered virtual networks to Virtual wan hub. …
Azure Firewall in VWAN Public IP
Hello! I currently have deployed a secured VWAN with an Azure Firewall. I am wanting my P2S VPN to come out as a static IP. I have 1 Public IP allocated to the Azure Firewall. However, I am not sure if these are Static or if they can change without…
Migrate ER circut, S2S, P2S to VWAN
Hi Experts, Our customer currently has an ExpressRoute circuit, S2S, and P2S configured and operational. They are planning to implement Azure Virtual WAN and migrate all existing hybrid connections to this new VWAN. Could experts provide guidance on how…
Is it possible to transfer the public IP address from one VM to another?
The title says it all I suppose. I've been tasked with figuring out how to transfer the Public IP address from one VM to another. The reason why is because we have test VMs that we prepare on a test resource group and then roll them out to the customer.…
vWan in the same Region
strong text
Virtual WAN Hub not advertising other Hub IP Space over VPN
I have the following Azure VWAN with Palo Alto Cloud NGFWs set up: Azure VWAN: hub-west: 10.100.0.0/16 hub-east: 10.200.0.0/16 Cloud NGFWs are deployed as follows hub-west-cngfw: 10.100.112.0/24 hub-east-cngfw: 10.200.112.0/24 I then have 2…
Cisco SD-WAN for Azure Virtual WAN
Trying to create a create Cisco SD-WAN for Azure Virtual WAN but getting the following error: Deployment template validation failed: 'The provided value for the template parameter 'nvablobs' at line '1' and column '784' is not valid. Length of the…